Category:

Description

Pipe Support Supply

We are also agent for PIHASA, Pipe hanger solutions company originated in Madrid, Spain. We promote various of pipe support such as variable/constant spring support, Rigid Struts, hydraulics Snubber, hangers for a very wide range of sizes, loads and temperature.

Vibration Clamp

  • Specifically designed to cater high vibration loadings
  • Suitable for piping systems that experience vibration frequency level of up to more than 33Hz
  • Able to withstand high temperature of up to 300˚C
  • Suitable for both insulated and non-insulated systems
  • Proven to be safe, practical and easy to install

Hanger

We have a wide range of standard catalogue components (rods, eye nuts, clevises, turnbuckles, clamps, lugs, beam attachments, etc.) that combine to make hanger sets. Pipe hangers can withstand the load of the pipe and avoid friction loads associated with resting supports. Designed at an appropriate length that keeps angulation due to horizontal movements within an acceptable range, they are very versatile and there can be found many installation solutions.

In addition, these components serve as accessories for spring units in order to make a complete spring hanger.

Snubber

Hydraulic snubbers are special elements designed to absorb large impacts in the piping due to seismic phenomena or other circumstances like water hammers.

During the normal operation and movement of piping, they do not restrict movements, offering minimal resistance. However, when a sudden impact occurs, they lock themselves becoming highly rigid supports, protecting the system against that event.

They can be installed in any position with relation to the pipe by the use of special beam attachments (“rear brackets”), highly rigid clamps and special enlargement pipes.

Rigid Struts

Struts are linear articulated supports characterized by their high rigidity that restrict the movement of pipe in their axis direction.

As with hydraulic shock arrestors, they can be installed in any position with relation to the pipe depending on the direction of the movement that they are designed to restrict. They connect to the adjacent structure by the use of special beam attachments (“rear bracket”), and they connect to the supported pipe with dynamic clamps (option 1) or with highly rigid plate clamps (option 3). They can also be used for supporting equipment or to connect with trunnions or welded shoes by the use of a rear bracket on the supporting end (option 2).

Constant Spring Support

Constant spring support allow vertical movements of the pipe due to thermal expansion or contraction and have a fixed load output throughout their travel range. They are used when vertical movement is high (from 50-75 mm upwards) and when stress at the pipe nozzles and equipment has to be very limited.

There is a wide range of models, sizes and types in order to cover a very extensive range of loads, travels and installation configurations, being used as a hanger (above the pipe) or as a support (below the pipe).

Variable Spring Support

Spring supports allow vertical pipe displacement due to thermal expansion or contraction, and support the weight of the pipe system. In a variable spring support, load varies at a constant rate with the vertical travel. For that reason, they are used when the vertical movement is of a low or medium range (up to 50-75 mm).

There is a wide range of models, sizes and types in order to cover a very extensive range of loads, travels and installation configurations, being used as a hanger (above the pipe) or as a support (below the pipe).

Collaboration Partner

Pipe Support – Pihasa (Pipe hanger Solution)

Vibration Clamp technology (Petronas GTS)

Leave a Reply

Your email address will not be published.

You may use these <abbr title="HyperText Markup Language">HTML</abbr> tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

*